community
Licensed Electrician Sydney NSW, Find & Verify
How to find a licensed electrician in Sydney, verify credentials via Fair Trading NSW, understand emergency electrical work costs and Certificate of Compliance requirements.
How we reported this
Electricians in Sydney 2026
Sydney has thousands of licensed electricians servicing all metropolitan areas. All electrical work in Australia must be carried out by a licensed electrician, DIY electrical work is illegal under the Electricity (Consumer Safety) Act 2004 in NSW and can result in fines, voided insurance and serious safety risks. fairtrading.nsw.gov.au
How to Check if Your Electrician is Licensed in NSW
NSW electricians must hold a valid electrical contractor licence or work under one. Verify licences at fairtrading.nsw.gov.au/licence-check. Always ask to see the licence before work begins. In NSW, all electrical work must also be covered by a Certificate of Compliance Electrical Work (CCEW).
What Does an Electrician Cost in Sydney 2026?
- Call-out fee: $80-$200 for a standard call-out
- Hourly rate: $100-$180/hour for daytime work
- After-hours/emergency rate: $250-$500+/hour, significantly higher for overnight or weekend emergencies
- Switchboard upgrade (single phase): $800-$2,500 supply and install
- Power point installation: $100-$250 per point
- Safety switch installation: $150-$400
- Smoke alarm upgrade (mains-connected): $80-$200 per alarm
Electrical Emergencies in Sydney
True electrical emergencies (sparking from powerpoints, circuit breaker repeatedly tripping, burning smell from switchboard, live wires) require immediate attention. For life-threatening electrical emergencies, call 000. For urgent but non-life-threatening faults, contact an emergency electrician. Always isolate the circuit at the switchboard if safe to do so before the electrician arrives.
Switchboard Upgrades in Sydney
Many Sydney homes, particularly pre-1990 properties, still have old ceramic fuse boxes rather than modern safety switches (RCDs). NSW regulations require safety switches on power circuits and lighting circuits in new work, and an electrician upgrading a switchboard will install these to current standards. Older Sydney properties (Paddington, Glebe, Newtown, Balmain, Leichhardt) frequently need switchboard upgrades when undergoing renovations.